Two Tile Stencils for One Trendy Floor Pattern
DIY Trendy Floor with Two Tile Stencils
Hello, my lovely Cutting Edge Stencils fans! Are you having a hard time choosing the perfect stencil design but there are just too many tile stencil options to pick from? Create your dream tile floor using TWO gorgeous tile stencil patterns from Cutting Edge Stencils! We have the perfect stencils for painting so you can mix and match paint colors and stencils to create your own trendy floor pattern. Check it out:
Before we begin stenciling, let’s make sure your floor is prepped and ready to go! No need to stress, preparing your floor is easy and doesn’t take long at all. First, sweep away any dirt that may be on the surface of your floor. Follow up with a mop and some good cleaner to ensure that the floor is clean. Tape off the bottom of your wall or baseboard with blue painter’s tape. Then, apply a good adhesive primer such as Stix. You can use a quality tight nap roller or even a foam roller for this. After the primer has fully dried you can apply your base coat. Allow this to dry for a full twenty-four hours. We wanted a bright base, so we chose our favorite Benjamin Moore Navajo White as our base coat color. For all of the supplies used on this stencil project, check the list below:
What You’ll Need:
- Nola Tile Stencil
- Jewel Tile Stencil
- 3/4 Professional Stencil Brush
- Spray adhesive
- Benjamin Moore Palm Cost Teal
- Benjamin Moore Gold Mine
- Benjamin Moore Midnight Navy
- Blue Painter’s tape
- Water Based Polyurethane
First you’ll begin by placing your Nola Tile Stencil on the center of your floor. For extra adhesion, you can apply spray adhesive to the back of the stencil before placing it on the floor. Spray adhesive can also help reduce paint seepage from underneath the stencil!
Evenly coat your professional stencil brush with paint and offload any excess paint onto a paper towel. This is one of the most important steps when it comes to stenciling! The number one mistake is having too much paint on your stencil roller or brush. The goal is to have your stencil roller evenly covered with paint but to be almost dry to the touch. For more in-depth instructions, check out our How To Stencil section on our website!
With a professional stencil brush, gently pounce the brush up and down to achieve full coverage. Start from inside openings and work your way out!
To continue the pattern along the surface, align the tile stencil using the built-in registration marks and the previously stenciled parts of the design. This system makes stenciling effortlessly easy!
Continue the stenciling process with the Nola Tile until the entire surface is complete!
The second step for this design involves some creativity! We fell in love with the star pattern of the Jewel Tile and figured out that the outer stars are 8 8/16 inches across which would fit perfectly in the open area of the Nola tile (which equals out to 8 10/16 inches). The best part about our stencils is that they are super versatile and can be altered in any way to get the look you desire! Now, place the Jewel Tile stencil in the center of the Nola Tile Stencil.
Play around with color choices and choose the best to fit your home! With a 3/4 professional stencil brush, gently pounce the brush up and down to achieve full coverage of the stars.
Continue these steps with the Jewel Tile Stencil until all open spaces are complete!
Last, you'll want to seal your stenciled masterpiece with 2-3 coats of water-based polyurethane. This will provide durability for years to come!
Ta Da! We are in love with how our trendy floor makeover came out using TWO tile stencils! Wow!
Can’t get enough of Cutting Edge Stencils:
- Check out our Cutting Edge Stencils Facebook Page to see our beautiful customer photos and interact with the people who created them.
- Buy our Tile Stencils or Wall Stencils for your next stencil project, and browse our other wonderful stencil designs.
- Follow us on Instagram and Pinterest and share your designs using #CuttingEdgeStencils. We love seeing your projects!
- Feeling inspired? Check out our other Blog posts.
