Banana Leaf Allover Stencil

Obsessed with trendy Martinique Wallpaper? So are we! Thats why we created our Banana Leaf stencil, inspired by the iconic tropical print. Tropical wallpaper can be so pricey and tricky to install, so now you can create the banana leaf pattern inexpensively and easily using our reusable wall stencil. So get on the tropical trend with this large palm leaf stencil pattern! You can almost feel the breeze blowing through the tropical leaves.

If you compare our stencil thickness, size, design quality and prices, you will be amazed at the value that Cutting Edge Stencils offer!

This stencil pattern comes with an additional FREE Top edge stencil: the upper part of the design cut as a smaller separate stencil. It makes it easy to fill the gaps close to the ceiling line after your main pattern is stenciled.

Stenciling on rough or textured walls may contribute to increased paint bleed. For more information on stenciling on textured walls, see our F.A.Q. section.

Want to learn how to stencil a damask or allover pattern? Here are the detailed illustrated step-by-step Damask/Allover Stenciling Tips.

Also, make sure you watch our short step-by-step Video Tutorials! You'll find them extremely helpful for your stenciling project. Even beginners get great results!

We recommend using any allover stencil with our Clip-on Stencil Level, (sold separately). Discover how easy it is to achieve perfectly level results without dealing with all those bulky heavy bubble levels and expensive laser levels. We cannot recommend the Level enough, it's a real time-saver and is so handy!

Although our stencils do not require the use of spray adhesive, this pattern could benefit from it to help minimize paint seepage, especially if your walls have a slight texture to them. (Elmer's spray adhesive seems to be the best). Make sure you shake the can well and lightly mist (not drench) the stencil, and let it dry for a moment before positioning it on the wall. This step will prevent the adhesive residue transferring to the wall. You'll need to re-mist the stencil after a few repeats. Note: you will still need to hold the stencil in place with a few pieces of blue painters tape! Adhesive by itself is not enough to hold the stencil on the wall. Clean-up tip: Spray the stencil with Simple Green to help to remove adhesive residue. Please note that once you've used spray adhesive on your stencil, it will never really come off completely. That is why we personally prefer not to use adhesive, and instead use less paint on your roller or stencil brush.

Did you know you can stencil your own fabric and use it for curtains, tablecloths, pillows, etc.? When stenciling on fabric, stencil adhesive is very helpful. First, tape your ironed fabric to the surface so it doesn't move around while you stencil. Use stencil brushes, or dense foam roller, and add some textile medium ( sold in craft stores) to your acrylic paint. You can also get a special fabric paint, but, frankly, good craft acrylics with a dollop of textile medium work just as well, and cost way less too! :) Let the stenciled image dry completely, 24 hours is best, then heat-set it by ironing the fabric for about 20 sec. ( more or less) on a LOW setting through the piece of cloth. Heat-setting will cure the paint and will prevent it from being washed off in the washing machine. Always experiment with a sample of your fabric first to ensure good results. I've stenciled on silk, cotton, linen and even sheer fabrics with great results. It's always better if your fabric doesn't have too much texture.

About seepage and imperfections: Even with a proper loaded roller and correct technique you might get some minor paint seepage here and there. In most cases it's not noticeable, especially from a couple of feet away and it can be easily touched up with a small brush. Don't forget that you're creating a "hand-painted wall finish". A few imperfections and some paint seepage here and there are natural and inevitable for this type of work. To avoid seepage, use spray adhesive and less paint on your roller and brush.

All of our stencils are made of thick, sturdy but flexible 12 mil clear plastic, reusable, easy to clean and stenciler-friendly! In our 20+ years of professional stenciling this material has proven to be far superior than any other material we used, including the industry standard 8 mil mylar.

We are certain you'll notice the difference and will love working with it, just like all the folks who already bought our stencils.

Our stencils are made to last and with proper care and storage will serve you for a long time.